FAQ – Lawn Vacs
A: The blower uses quick pins to mount exsisting holes on the deck . For most applications, the catcher mounts simply bolt to the mower frame.
A: Approximately 375-425 lbs.
A: Rub soap and water on the inside of the hose.
A: Approximately 350 lbs.
A: Rub soap and water on the inside of the hose.
A: The belt size varies. A94K 1/2″ X 96 to A110K 1/2″ X 112.” Please see the manual for the belt size for your mower.
A: Excessive wear generally indicates installation issues. Click on attached link for detailed instructions U-Blower Installation
A: Approximately 75 lbs.
A: Make you that you have the blower blocking plate installed. Position the blower tight against the discharge and make sure there are no gaps on either side of the blower. You can also try using low lift blades.
A: While cutting thicker wetter grass or when using larger deck sizes you may need to slow down. If this doesn’t work, try using high lift blades to create more turbulence under the deck allowing better material flow into the blower. Commercial Blower Air Flow
