BAD BOY - LEAF AND GRASS CATCHERS

Features
  • DUMPS WITHIN SECONDS
  • DUMP CATCHER – 18 CU FT/14.5 BUSHEL CAPACITY
  • FITS MOST 48” TO 72” MOWERS
  • QUICK PINS TO ATTACH OR DETACH
  • HEAVY DUTY 3/16 PLASTIC
  • 7” INTAKE FOR MAX AIR FLOW
Specifications
  • CAPACITY – 18 CU FT / 14.5 BUSHELS
  • CATCHER CLAMSHELL – 3/16” MOLDED POLYETHYLENE
  • CATCHER DIMENSIONS – L 42” X W 50” X H 38”
  • WEIGHT – 120 LBS
  • DUMPING CLEARANCE – 22” to 28”
  • DISTANCE FROM ROPS TO CATCHER – 2” to 8”
  • HOSE – 7” PREMIUM POLYURETHANE (-40°F TO + 195°F)
  • WE DO NOT FIT ANY 36″, 42”, 46” OR 50” DECKS

PV 18 DUMP CATCHER

The PV18 Zero Turn Bagger holds 14 1/2 bushels. The collection system offers efficient material reduction and high capacity. The wedge shape of the PV 18 only adds 20 inches of length to most mowers. The dump lever is easy to pull and gives a secure and positive spring-like feel when the door is latched and locked into place. The improved tubular frame offers increased strength for demanding conditions.

Features
  • DUMPS WITHIN SECONDS
  • DUMP CATCHER – 18 CU FT/14.5 BUSHEL CAPACITY
  • FITS MOST 48” TO 72” MOWERS
  • DUMP CLEARANCE – QUICK PINS TO ATTACH OR DETACH
  • HEAVY DUTY 3/16 PLASTIC
  • 7” INTAKE FOR MAX AIR FLOW
  • 8″ BOOT AND INTAKE HOSE
Specifications
  • CAPACITY – 18 CU FT / 14.5 BUSHELS
  • CATCHER CLAMSHELL – 3/16” MOLDED POLYETHYLENE
  • CATCHER DIMENSIONS – L 42” X W 50” X H 38”
  • WEIGHT – 120 LBS
  • DUMP CLEARANCE – AS HIGH AS 36″ TO 42″ W/HITCH RAISED
  • DISTANCE FROM ROPS TO CATCHER – 2” to 8”
  • HOSE – 7” PREMIUM POLYURETHANE (-40°F TO + 195°F)

PV 18 PTO DUMP CATCHER

Our powerful PTO blower converts a 540 RPM tractor to spin our large steel fan over 3000 RPMs. The blower canister comes with a bolt in steel liner to protect the housing.  The whole system comes off in seconds using the standard 3 point pins or quick hitch. Our PTO Stand is a set of quick attach caster wheels that allow the catcher to be removed with ease and makes moving the catcher in your garage or shop very simple. For tractors with cabs, our hydraulic dump kit allows the operator to stay in the cab while dumping.

Features
  • DUMPS WITHIN SECONDS
  • DUMP CATCHER – 10 CU FT/10 BUSHEL CAPACITY
  • FITS MOST 48” TO 72” MOWERS
  • QUICK PINS TO ATTACH OR DETACH
  • HEAVY DUTY 3/16 PLASTIC
  • 7” INTAKE FOR MAX AIR FLOW
Specifications
  • CAPACITY – 13 CU FT / 10.5 BUSHELS
  • CATCHER CLAMSHELL – 3/16” MOLDED POLYETHYLENE
  • CATCHER DIMENSIONS – L 31” X W 47” X H 39”
  • WEIGHT – 115 LBS
  • DUMP CLEARANCE – 22” to 28”
  • ADDS 13” TO 27” TO MOWER LENGTH
  • HOSE – 7” PREMIUM POLYURETHANE (-40°F TO + 195°F)
  • WE DO NOT FIT ANY 36″, 42”, 46” OR 50” DECKS

PV 13 DUMP CATCHER

The PV13 Lawn Vacuum Catcher holds 13 cu ft/10 bushels. This dump from the seat catcher empties in a few seconds. Built with 3/16” plastic and heavy duty steel construction, this catcher will last for many years. The PV13 is designed to fit 48”-60” mowers for use on residential and small commercial properties. The compact design and quick dumping of the PV13 provide efficient work of your material collection.

Features
  • DUMPS WITHIN SECONDS
  • DUMP CATCHER – 13 CU FT/10 BUSHEL
  • CAPACITY
    FITS MOST 48” TO 72” MOWERS
  • QUICK PINS TO ATTACH OR DETACHHEAVY DUTY 3/16 PLASTIC7” INTAKE FOR MAX AIR FLOW
Specifications
  • CAPACITY – 13 CU FT / 10.5 BUSHELS
  • CATCHER CLAMSHELL – 3/16” MOLDED POLYETHYLENE
  • CATCHER DIMENSIONS – L 31” X W 47” X H 39”
  • WEIGHT – 115 LBS
  • DUMP CLEARANCE – 22” to 28”
  • WE DO NOT FIT ANY 36″, 42”, 46” OR 50” DECKS

PV 13S DUMP CATCHER

PV13 dump catchers for Stand On Mowers collects both grass and leaves with amazing efficiency. The quick attach belt drive blower will greatly reduce leaves to help you get the job done faster. The rear dump catchers are a perfect option for properties that have area(s) to dump or for landscapers with truck loaders. They are also high enough off the ground to dump into low profile containers to manually lift into a vehicle. Rear side mount catcher allows safe operations on hills as operator can stand or walk. Pull a pin and the catcher pivots into Transport Position against the pad saving space on the trailer.

Features
  • FITS MOST 48” TO 72” DECKS
  • QUICK PINS TO ATTACH OR DETACH
  • WE HAVE THE MOST POWERFUL, EFFICIENT BLOWER IN THE INDUSTRY FOR ANYONE THAT PUTS A BLOWER ON THE END OF THE DECK
  • THE 16” DIAMETER FAN MADE FROM HIGH GRADE STEEL, SPINS FASTER THAN THE MOWER BLADES
  • THE VERTICAL DESIGN PLACES THE FAN BLADES AT THE OPENING OF THE DECK SO MOST OF THE MATERIAL WILL HIT IT
  • THIS BLOWER WILL MULCH BETTER, SHOOT HARDER THAN ALL OTHER SYSTEMS
Specifications
  • 16” HIGH GRADE STEEL FAN
  • BLOWER ADDS 12” TO THE DECK
  • WEIGHT – 75 LBS
  • BOLT IN, REPLACABLE STEEL LINER PROTECT THE CANISTER
  • ATTACH/DETACH IN LESS THAN 30 SECONDS WITH 1 OR 2 PINS
  • HOSE – 7” PREMIUM POLYURETHANE (-40°F TO + 195°F)
  • FITS 48”-72” DECKS
  • WE DO NOT FIT ANY 36″, 42”, 46” OR 50” DECKS

COMMERCIAL BLOWER

Our Commercial Blower has been redesigned.
Design upgrades:

  • Our new pulley system offers a significantly longer belt life due to substantial heat reduction.
  • Increased fan speeds, larger fan blades and a 7″ hose create a significant increase of air flow (CFM).
  • We reversed the direction the fan spins to “flow” the material directly from your deck to the catcher.
  • Our new steel liner protects the blower canister in the high wear areas and can be easily replaced.
  • 1″ heavy duty sealed bearings with a durable cast housing.